Step 1 : Register dll files
Click Start and then click Run
Type regsvr32 OLE32.DLL
Type regsvr32 inetcomm.dll
Step 2 : Register Outlook Express.
Click Start, and then click Run.
In the Open box, type msimn /reg
Click OK.
Step 3 :Uncheck Read only option from all .dbx files
To correct this, follow the below steps to remove the read-only attribute fromtheOutlook Express *.dbx mail files:
Click Start and then click on Search..
Type in *.dbx and click in Search
For each *.dbx file that is found, right-click the file, click Properties, and then clear the Read- only check box.
Click Apply, and then click Close.
NOTE: The *.dbx files should only have the Archive check box selected.
Step 4 :Rename folder.dbx
Click Start and then click on Search
Type in folders.dbx and click in Search
Right-click the Folders.dbx file, and then click Rename.
Type folders.old, and click OK.
Start Outlook Express again.
Note: New Folders.dbx file will be created automatically.
Friday, July 24, 2009
Unable to view gadgets on Windows Vista Sidebar
Follow the steps below
1. Right click on the Gadget and click on remove/delete.
2. Click Start, type CMD.
3. Right click on CMD and then click on Run as Administrator.
4. Type the following commands press enter after each command.
* regsvr32 -u sbdrop.dll
* regsvr32 -u wlsrvc.dll
* regsvr32 atl.dll
* regsvr32 sbdrop.dll
* regsvr32 wlsrvc.dll
* regsvr32 scrrun.dll
* regsvr32 jscript.dll
* regsvr32 msxml3.dll
* regsvr32 vbscript.dll
5.Restart the computer.
6.Add gadgets to the sidebar
1. Right click on the Gadget and click on remove/delete.
2. Click Start, type CMD.
3. Right click on CMD and then click on Run as Administrator.
4. Type the following commands press enter after each command.
* regsvr32 -u sbdrop.dll
* regsvr32 -u wlsrvc.dll
* regsvr32 atl.dll
* regsvr32 sbdrop.dll
* regsvr32 wlsrvc.dll
* regsvr32 scrrun.dll
* regsvr32 jscript.dll
* regsvr32 msxml3.dll
* regsvr32 vbscript.dll
5.Restart the computer.
6.Add gadgets to the sidebar
Unable to play mpg files after XP SP2 installation
Follow the steps below.
1. Click Start , and then click Run
2. Type the following commands. Press ENTER after you type each command.
* Regsvr32 quartz.dll
3. Restart Computer.
1. Click Start , and then click Run
2. Type the following commands. Press ENTER after you type each command.
* Regsvr32 quartz.dll
3. Restart Computer.
Unable to install Windows XP SP2 Error :system cannot find the file specified
Follow the steps below:
1. Click Start , and then click Run
2. Type the following commands. Press ENTER after you type each command.
* Regsvr32 Softpub.dll
* Regsvr32 Wintrust.dll
* Regsvr32 Initpki.dll
* Regsvr32 Urlmon.dll
3. Restart the computer and boot to desktop
4. Start the installation of SP2
1. Click Start , and then click Run
2. Type the following commands. Press ENTER after you type each command.
* Regsvr32 Softpub.dll
* Regsvr32 Wintrust.dll
* Regsvr32 Initpki.dll
* Regsvr32 Urlmon.dll
3. Restart the computer and boot to desktop
4. Start the installation of SP2
Thursday, July 23, 2009
Active Desktop Recovery.
Move to %systemroot%\Profiles\\Application Data\Microsoft\Internet Explorer Select Desktop.htt and delete (it is a hidden file so you will need to change the view first View - Folder Options - View) Close Explorer Right click on the desktop and choose Refresh
Office 2007 Configuration wizard runs every time I start any Application (word, excel, etc)
For Office 2007:-
Check logs in event viewer.
Then go to C:\Program Files\Microsoft Office\Office12
Solution : You will find a file named ID_100012.DPC
Copy the same file and paste it on desktop the rename the file on desktop as ID_100053(Same as missing file mentioned in event viewer log).
Now run any office program will work....
Check logs in event viewer.
Then go to C:\Program Files\Microsoft Office\Office12
Solution : You will find a file named ID_100012.DPC
Copy the same file and paste it on desktop the rename the file on desktop as ID_100053(Same as missing file mentioned in event viewer log).
Now run any office program will work....
Tuesday, July 21, 2009
How to optimize Mozilla Firefox
1. Open Firefox application
2. In the Address Bar type about:config
3. Click 'I will be careful, I promise' on the warning message
4. # Now look for network.http
* Change the Variables to the following values:
o Network.http.pipelining- True
o Network.http.pipelining.maxrequest - Between 8-30
Network.http.proxy.pipelining- True
5. # To speed up the loading of a webpage do the following:
* Right Click anywhere in the browser window and select New and Integer *
* Type nglayout.initialpaint.delay into the window and set the value to 0
Restart the browser
2. In the Address Bar type about:config
3. Click 'I will be careful, I promise' on the warning message
4. # Now look for network.http
* Change the Variables to the following values:
o Network.http.pipelining- True
o Network.http.pipelining.maxrequest - Between 8-30
Network.http.proxy.pipelining- True
5. # To speed up the loading of a webpage do the following:
* Right Click anywhere in the browser window and select New and Integer *
* Type nglayout.initialpaint.delay into the window and set the value to 0
Restart the browser
Error: CRC check while installing winrar
This article describes about CRC error while installing Winrar
Re-download Winrar from http://www.rarlab.com/.
Disable the auto-protection of your antivirus tool or exit your antivirus tool
Try installing WinRAR again.
Re-download Winrar from http://www.rarlab.com/.
Disable the auto-protection of your antivirus tool or exit your antivirus tool
Try installing WinRAR again.
How to import from Outlook to Eudora
Note: Before you begin the import, we recommend that you empty the Deleted Items folder in Microsoft Outlook.
1. From the File menu, choose Import. The Import Mail and Addresses dialog box appears.
2. In the dialog box, choose Microsoft Outlook.
3. Choose Import Mail and/or Address Book then click OK. Microsoft Outlook should begin importing into Eudora.
Depending on how much mail you have, the process may take a few minutes. Once it finishes, you should see your mailboxes available in Eudora.
1. From the File menu, choose Import. The Import Mail and Addresses dialog box appears.
2. In the dialog box, choose Microsoft Outlook.
3. Choose Import Mail and/or Address Book then click OK. Microsoft Outlook should begin importing into Eudora.
Depending on how much mail you have, the process may take a few minutes. Once it finishes, you should see your mailboxes available in Eudora.
Error : Receive Duplicate Messages When You Download E-Mail from the Server in Outlook Express
Cause:
'Leave messages on server? is checked in account settings of Outlook Express.
This behavior can occur if the Pop3uidl.dbx file is damaged.
Solution:
SUMMARY
To resolve this behavior, rename the Pop3uidl.dbx file, and then restart Outlook Express. Follow these steps:
Close Outlook Express.
Click Start-> Search and then click For Files or Folders.
In the Search for files or folders named box, type Pop3uidl.dbx, and then click Search Now.
Under Search Results, right-click the Pop3uidl.dbx file, and then click Rename.
Type Pop3uidl.old, and then press ENTER.
Restart Outlook Express
'Leave messages on server? is checked in account settings of Outlook Express.
This behavior can occur if the Pop3uidl.dbx file is damaged.
Solution:
SUMMARY
To resolve this behavior, rename the Pop3uidl.dbx file, and then restart Outlook Express. Follow these steps:
Close Outlook Express.
Click Start-> Search and then click For Files or Folders.
In the Search for files or folders named box, type Pop3uidl.dbx, and then click Search Now.
Under Search Results, right-click the Pop3uidl.dbx file, and then click Rename.
Type Pop3uidl.old, and then press ENTER.
Restart Outlook Express
Unable to install programs after Windows Vista Restore by using Windows PC Backup and Restore image.
You must re-create the Temp folder Details:
You cannot install some programs after you restore Windows Vista by using a 'Windows Complete PC Backup and Restore Image'. To resolve this problem after the problem has occurred you must re-create the Temp folder. Also, you must make sure that the Temp folder has the correct permissions. To do this, follow these steps: 1. Click Start, click All Programs, and then click Accessories.
2. Right-click Command Prompt, and then click Run as Administrator. If you are prompted for an administrator password or confirmation, type your password or click Continue. 3. Type the following command at the command prompt, and then press ENTER: md %windir%\temp 4. Click Start, type %windir% in the Start Search box, and then click Windows in the Programs list.
5. Right-click the Temp folder, and then click Properties.
6. Click the Security tab, click Advanced, and then click Edit. If you are prompted for an administrator password or confirmation, type your password or click Continue.
7. Click to clear the Include inheritable permissions from this object's parent check box.
8. Click Remove, and then click OK.
9. You will receive two warning messages. Click Yes in each warning message.
10. Click OK two times to close the Advanced Security Settings dialog box and the folder properties dialog box.
11. Open the Command Prompt window again.
12. Type the following command at the command prompt, and then press ENTER: icacls %windir%\temp /grant 'BUILTIN\Users:(CI)(S,WD,AD,X)' 'BUILTIN\Administrators:(F)' 'BUILTIN\Administrators:(OI)(CI)(IO)(F)' 'NT AUTHORITY\SYSTEM:(F)' 'NT AUTHORITY\SYSTEM :(OI)(CI)(IO)(F)' 'CREATOR OWNER:(OI)(CI)(IO)(F)'.
You cannot install some programs after you restore Windows Vista by using a 'Windows Complete PC Backup and Restore Image'. To resolve this problem after the problem has occurred you must re-create the Temp folder. Also, you must make sure that the Temp folder has the correct permissions. To do this, follow these steps: 1. Click Start, click All Programs, and then click Accessories.
2. Right-click Command Prompt, and then click Run as Administrator. If you are prompted for an administrator password or confirmation, type your password or click Continue. 3. Type the following command at the command prompt, and then press ENTER: md %windir%\temp 4. Click Start, type %windir% in the Start Search box, and then click Windows in the Programs list.
5. Right-click the Temp folder, and then click Properties.
6. Click the Security tab, click Advanced, and then click Edit. If you are prompted for an administrator password or confirmation, type your password or click Continue.
7. Click to clear the Include inheritable permissions from this object's parent check box.
8. Click Remove, and then click OK.
9. You will receive two warning messages. Click Yes in each warning message.
10. Click OK two times to close the Advanced Security Settings dialog box and the folder properties dialog box.
11. Open the Command Prompt window again.
12. Type the following command at the command prompt, and then press ENTER: icacls %windir%\temp /grant 'BUILTIN\Users:(CI)(S,WD,AD,X)' 'BUILTIN\Administrators:(F)' 'BUILTIN\Administrators:(OI)(CI)(IO)(F)' 'NT AUTHORITY\SYSTEM:(F)' 'NT AUTHORITY\SYSTEM :(OI)(CI)(IO)(F)' 'CREATOR OWNER:(OI)(CI)(IO)(F)'.
How to reset router back to factory default settings
To perform a reset, please follow steps below:
Step 1 With the unit on, place a paper clip into the hole on the back on the unit labeled Reset.
Step 2 Hold paper clip down for 10 seconds and release.
Step 3 The unit will reboot on its own. Once the WLAN light stops blinking, the unit is reset.
The information in this article applies to:
D-Link Router
Step 1 With the unit on, place a paper clip into the hole on the back on the unit labeled Reset.
Step 2 Hold paper clip down for 10 seconds and release.
Step 3 The unit will reboot on its own. Once the WLAN light stops blinking, the unit is reset.
The information in this article applies to:
D-Link Router
How to run system recovery on Toshiba Satellite
1. Toshiba Recovery for A10, A40, A60 systems
Insert the first recovery CD and restart the notebook.
Hold down the C key and the CD will load to the screen above.
Press 1 to begin the recovery.
You will be warned that all data will be lost. Press 1 to continue or 2 to Cancel.
The recovery image will now be copied. Change the CD when prompted and press Enter.
The process takes approximately 20 minutes. Once complete the user is prompted to remove the CD and press CTRL, ALT and DEL to restart.
2. Toshiba Recovery for L10, L20 systems
Insert the recovery DVD and restart the notebook
When In Touch With Tomorrow TOSHIBA screen is shown press the F12 key
Use the Up or Down cursor keys to select CD-ROM/DVD-ROM from the menu and then press Enter.
The screen below will be displayed.
Press 1 to begin the recovery
You will be warned that all data will be lost. Press 1 to continue or 2 to Cancel:
The recovery image will now be copied The process takes approximately 20 minutes. Once complete the user is prompted to remove the DVD and press CTRL, ALT and DEL to restart:
Toshiba Recovery for M10 system
Insert the first recovery CD and restart the notebook.
Hold down the C key and the CD will load to the screen above.
Press 1 to begin the recovery.
You will be warned that all data will be lost. Press 1 to continue or 2 to Cancel.
The recovery image will now be copied. Change the CD when prompted and press Enter.
The process takes approximately 20 minutes. Once complete the user is prompted to remove the CD and press CTRL, ALT and DEL to restart.
Insert the first recovery CD and restart the notebook.
Hold down the C key and the CD will load to the screen above.
Press 1 to begin the recovery.
You will be warned that all data will be lost. Press 1 to continue or 2 to Cancel.
The recovery image will now be copied. Change the CD when prompted and press Enter.
The process takes approximately 20 minutes. Once complete the user is prompted to remove the CD and press CTRL, ALT and DEL to restart.
2. Toshiba Recovery for L10, L20 systems
Insert the recovery DVD and restart the notebook
When In Touch With Tomorrow TOSHIBA screen is shown press the F12 key
Use the Up or Down cursor keys to select CD-ROM/DVD-ROM from the menu and then press Enter.
The screen below will be displayed.
Press 1 to begin the recovery
You will be warned that all data will be lost. Press 1 to continue or 2 to Cancel:
The recovery image will now be copied The process takes approximately 20 minutes. Once complete the user is prompted to remove the DVD and press CTRL, ALT and DEL to restart:
Toshiba Recovery for M10 system
Insert the first recovery CD and restart the notebook.
Hold down the C key and the CD will load to the screen above.
Press 1 to begin the recovery.
You will be warned that all data will be lost. Press 1 to continue or 2 to Cancel.
The recovery image will now be copied. Change the CD when prompted and press Enter.
The process takes approximately 20 minutes. Once complete the user is prompted to remove the CD and press CTRL, ALT and DEL to restart.
Unable to start any services. Got error 1084 service cannot be start in safe mode.
Open run then type "regedit".
Click on file and export then save it on the computer as regbackup.
press Ctrl+F and type safeboot.
Expand safeboot and delete the option key.
Restart the computer.
How to insert an image from a scanner into a Word 2007 document
Start Word 2007.
On the Insert tab, click Clip Art.
In the Clip Art pane, click Organize clips.
On the File menu, point to Add Clips to Organizer, and then click From Scanner or Camera.
Select the image, click Add, and then close Microsoft Clip Organizer.
On the Insert tab, click Clip Art.
In the Clip Art pane, click Organize clips.
On the File menu, point to Add Clips to Organizer, and then click From Scanner or Camera.
Select the image, click Add, and then close Microsoft Clip Organizer.
Mouse pointer jump in sonyVIO (mousepad)
1. Uninstall and reinstall the ALPS pointing device.
2. Restart the system.
3. Reinstall the driver.
4. check pop ups in IE and AOL.
2. Restart the system.
3. Reinstall the driver.
4. check pop ups in IE and AOL.
How to configure the size limit for both (.pst) and (.ost) files in Outlook 2007 and in Outlook 2003
Outlook 2007
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\12.0\Outlook\PSTThe user preference location for the registry entries is located in the following path in Registry Editor:
HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Outlook\PST
Click Modify, and then type the value in the Value data box.
# Click OK.
# Right-click WarnFileSize.
# Right-click MaxLargeFileSize.
# Right-click WarnLargeFileSize.
Outlook 2003
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\11.0\Outlook\PSTThe user preference location for the registry entries is located in the following path in Registry Editor:
HKEY_CURRENT_USER\Software\Microsoft\Office\11.0\Outlook\PST
Click Modify, and then type the value in the Value data box.
# Click OK.
# Right-click WarnFileSize.
# Right-click MaxLargeFileSize.
# Right-click WarnLargeFileSize.
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\12.0\Outlook\PSTThe user preference location for the registry entries is located in the following path in Registry Editor:
HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Outlook\PST
Click Modify, and then type the value in the Value data box.
# Click OK.
# Right-click WarnFileSize.
# Right-click MaxLargeFileSize.
# Right-click WarnLargeFileSize.
Outlook 2003
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\11.0\Outlook\PSTThe user preference location for the registry entries is located in the following path in Registry Editor:
HKEY_CURRENT_USER\Software\Microsoft\Office\11.0\Outlook\PST
Click Modify, and then type the value in the Value data box.
# Click OK.
# Right-click WarnFileSize.
# Right-click MaxLargeFileSize.
# Right-click WarnLargeFileSize.
Error: Outlook could not create the work file. Check the temp environment variable.
Step 1: Delete temporary files
1 .Click Start, click on Run and then type temp.
2. Select all temporary files, Delete All files.
3. Click Start, click on Run and then type %temp%.
4. Select all temporary files, Delete All files.
5. Click Start, and then click Run.
6. In the Run box, type cmd, and then click OK.
7. In the command line, type echo %temp% and press Enter.
8. In the command line, type echo %tmp% and press Enter.
Step 2: Change the cache location in Registry Editor
1. Click Start, and then click Run.
2. In the Run box, type regedit, and then click OK.
3. In Registry Editor, locate the following .keys,HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
4. Select Cache and check the value data. By default value data should be %windir%\temp.If value data is different then correct it. Still same problem move to next step.
5. Select Cache, right-Click and then click Modify.
6. Change the value data to c:\windows\temp.
7. Restart the computer.
_____________________
2nd That is my jugad
step1 : Create a new folder name "TEMP" in C drive.
Step2: Open IE go to tools>Internet option.
Step3: In general tab go to setting>View object and change the path of temp folder.Give that path you have created in c drive.
Step4: Restart the system.
1 .Click Start, click on Run and then type temp.
2. Select all temporary files, Delete All files.
3. Click Start, click on Run and then type %temp%.
4. Select all temporary files, Delete All files.
5. Click Start, and then click Run.
6. In the Run box, type cmd, and then click OK.
7. In the command line, type echo %temp% and press Enter.
8. In the command line, type echo %tmp% and press Enter.
Step 2: Change the cache location in Registry Editor
1. Click Start, and then click Run.
2. In the Run box, type regedit, and then click OK.
3. In Registry Editor, locate the following .keys,HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
4. Select Cache and check the value data. By default value data should be %windir%\temp.If value data is different then correct it. Still same problem move to next step.
5. Select Cache, right-Click and then click Modify.
6. Change the value data to c:\windows\temp.
7. Restart the computer.
_____________________
2nd That is my jugad
step1 : Create a new folder name "TEMP" in C drive.
Step2: Open IE go to tools>Internet option.
Step3: In general tab go to setting>View object and change the path of temp folder.Give that path you have created in c drive.
Step4: Restart the system.
Error: This copy of Windows is not genuine.You may be the victim of software counterfeiting
Follow the steps below to resolve the problem:
Boot the computer in Safe Mode and logon as Administrator.
Browse through following location:
C:\Windows\system32
C:\Windows\system32\dllcache
NOTE: Dllcache is hidden folder
Delete wgatray.exe
Click Start, Run and type regedit.exe.
Locate the following path:HKLM\Software\Microsoft\WindowsNT\CurrentVersion\winlogonotify
Delete the key 'WGALOGON'
Close Registry Editor.
Restart the computer.
If not Resolve go to the below link
http://support.microsoft.com/kb/921914
Boot the computer in Safe Mode and logon as Administrator.
Browse through following location:
C:\Windows\system32
C:\Windows\system32\dllcache
NOTE: Dllcache is hidden folder
Delete wgatray.exe
Click Start, Run and type regedit.exe.
Locate the following path:HKLM\Software\Microsoft\WindowsNT\CurrentVersion\winlogonotify
Delete the key 'WGALOGON'
Close Registry Editor.
Restart the computer.
If not Resolve go to the below link
http://support.microsoft.com/kb/921914
Sunday, July 19, 2009
"Can not create toolbar" error when enabling quick launch
When you try to enable the Quick Launch or the Desktop bar, you may get the error "Cannot create Toolbar". This might happen if the Quick Launch folder is missing in this location:%Appdata%\Microsoft\Internet Explorer\Quick LaunchResolution:-
To resolve the problem, type this command from Start, Run dialog:IE4UINIT.EXE
The above command creates the Quick Launch folder automatically, if it is missing in the above location. Now, try to enable the Quick Launch bar. If the problem persists, run the following command:REGSVR32 /i SHELL32.DLL
To resolve the problem, type this command from Start, Run dialog:IE4UINIT.EXE
The above command creates the Quick Launch folder automatically, if it is missing in the above location. Now, try to enable the Quick Launch bar. If the problem persists, run the following command:REGSVR32 /i SHELL32.DLL
Not able to access secure web sites(https://www.gmail.com)
Optimize Internet Explorer:
Tools->Internet Option
Delete temporary Internet Files, Reset all zones, clear ssl state, enabled ssl 2.0 & 3.0 from advance option
Unable to open .XLSX files or XLS file(error - " "Windows cannot find 'C\( path to ") in Excel
1.Try openig any saved xls file.
2.Try create an xls file and open it.
3.Uncheck "ignoure other application" from Excel option->general tab.
4.Uninstall Microsoft Excel and re-install if required.
2.Try create an xls file and open it.
3.Uncheck "ignoure other application" from Excel option->general tab.
4.Uninstall Microsoft Excel and re-install if required.
Unable to install window XP service pack 2
When installing window XP service pack to it got stuck on "checking product key screen"
Follow then these steps- :
1) Please go into the command prompt.
2)on c:\ type cd /d %windir%\inf
3)Then type ren oem*.inf oem*.old.
4)Then type ren oem*.pnf oem*.old1.
5)Then go to run type "%windir%\inf click ok.
6)Take the backup of INFCACHE.1 on desktop and delete it from inf folder. Reboot computer in safe mode and install Service pack 2.
Note :Please note the product key of your Window XP.
If you don't have window XP disc or don't know the product key of your window XP....Downloaded and run keyfinder to know product key of your window XP.
Follow then these steps- :
1) Please go into the command prompt.
2)on c:\ type cd /d %windir%\inf
3)Then type ren oem*.inf oem*.old.
4)Then type ren oem*.pnf oem*.old1.
5)Then go to run type "%windir%\inf click ok.
6)Take the backup of INFCACHE.1 on desktop and delete it from inf folder. Reboot computer in safe mode and install Service pack 2.
Note :Please note the product key of your Window XP.
If you don't have window XP disc or don't know the product key of your window XP....Downloaded and run keyfinder to know product key of your window XP.
Unable to open window media player and sidebar in window Vista
Follow these steps :-
1. Open command prompt by going to Start/all programs/accessories/ and right clicking on the icon - select 'run as administrator.
2. When the command window opens type: regsvr32 scrrun.dlland press the enter key
3. Now type regsvr32 jscript.dlland press the enter key
4. Now typeregsvr32 msxml3.dll and press the enter key.
5. Now typeregsvr32 atl.dlland press the enter key.
6. Restart your computer and check
1. Open command prompt by going to Start/all programs/accessories/ and right clicking on the icon - select 'run as administrator.
2. When the command window opens type: regsvr32 scrrun.dlland press the enter key
3. Now type regsvr32 jscript.dlland press the enter key
4. Now typeregsvr32 msxml3.dll and press the enter key.
5. Now typeregsvr32 atl.dlland press the enter key.
6. Restart your computer and check
Thursday, July 16, 2009
Error : 1084,This service cannot be started in safe mode.
When your system is in normal mode and it all features look like safe mode.Go to run>type "Regedit".Search(ctrl+f) "safeboot".
Delete "option" subkey from the "safeboot" key.
Restart the system.
Subscribe to:
Posts (Atom)
